Create depth and dimension with Siser Holographic heat transfer vinyl! They contain color changing chips that take your designs to a whole new level with many special effect colors and finishes. It can also be used to create a faux rhinestone look!
- 19" width
- Pearl is 18" wide
- Polyester Composition
- Pressure sensitive backing
- Gloss finish
- Layering not recommended
- Will not stretch
- Faux Rhinestone look
- Spectrum SH-32 has a manufacturing line every 18"-24"
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier cold
