Siser EasyWeed Heat Transfer Vinyl is a polyurethane film that is a ready-to-cut vinyl for custom garment decoration. With Siser Easyweed, it is actually a heat transfer film since it has no adhesive backing. EasyWeed is adhered to any garment of your choice by a heat press. EasyWeed is thinner than other heat transfer vinyls which also offers a quick one-second tack application which is great for layering! EasyWeed can be cut with laser cutting systems. EasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Here are some of the outstanding features of Siser EasyWeed which include:
- Peel hot or cold
- Can layer
- Semi-gloss finish
- CPSIA Certified
- Can be used with a Laser Cutter
- Presses at a low temp with low pressure
- Will not adhere to nylon
- Material may vary in width by 1/8-1/4"
- Composition: Polyurethane (PU)
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
