Siser EasyWeed Fluorescent Heat Transfer Vinyl is a polyurethane film that is a ready-to-cut vinyl for custom garment decoration. Siser EasyWeed Fluorescent Heat Transfer Vinyl comes in a variety of bright, eye-catching colors. Heat Transfer Vinyl is adhered to any garment of your choice by a heat press. Here are some of the features of Siser EasyWeed which include:
- Press at a low temp
- Can be layered
- Semi-gloss finish
- 90 microns thick
- Material may vary in width by 1/8-1/4
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
