Want a design that pops? Siser EasyWeed Electric may just be for you! EasyWeed Electric offers a pearlescent finish that you've never seen from heat applied material. EasyWeed Electric is on a pressure-sensitive liner and makes detailed designs and logos a breeze to cut. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. Siser EasyWeed Electric can be layered to create those special designs.
- Gives a pearlescent sheen look
- Can be layered
- CPSIA Certified
- 90 microns/3.5 Mils Thick
- Can be used with a Laser Cutter
- Presses at a low temp with low pressure
- Will not adhere to nylon
- Material may vary in width by 1/8-1/4"
- Composition: Polyurethane (PU)
- 45°/60° blade
-
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or coldApplication Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
