Siser Brick 600 is a 600 micron (.0236 inch) thick , yet still flexible heat transfer vinyl that works great for smaller logos or designs. Siser Brick 600 has a semi-gloss finish which looks great on caps, bags, and is ideal for left chest logos. If you need a little pop or dimension to your designs if your designs are looking a little flat, consider Siser Brick 600!
Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.
- Thick & flexible
- 20" width
- Can be cut with laser systems
- Static liner
- CANNOT LAYER
- Semi-gloss finish
- Adds an extra dimension to your garments
- Designed for smaller logos and designs
- Been popular in corporate logo use
- Polyurethane composition
- CPSIA Certified
- This Item is a Fargo Only item! If ordered, your entire order will ship from Fargo, ND!
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 311°F/155°C
• Use medium/firm pressure for 20 seconds
• Peel carrier cold
